Change Over Capacitor Switching Contactor Switched Capacitor

Change Over Capacitor Switching Contactor Switched Capacitor
The easy operation change over capacitor switching contactor switched capacitor also has high quality and reliable performance. We can assure you that our change over capacitor switching contactor switched capacitor is powered by clean energy and has high efficiency.
Product Details

Change Over Capacitor Switching Contactor Switched Capacitor

Application
 CJ19 series capacitor changeover contactor (Herein after referred to as Contactor).It’s suitable using in the circuits up to the rated insulation voltage 690V AC 50/60Hz.Under AC-6b usage, the rated working voltage is 400V,rated current up to 87A low voltage reactive compensation devices,on and off with low voltage reactive compensation capacitor group, in order to adjust the power factor of electric system COS φ value.Contactor with inhibition of flow unit, which can effectively reduce the impact of the switching inrush current of capacitor group and lower operating over voltage.

Technical Parameter

Model

CJ19-25

CJ19-32

CJ19-43

CJ19-63

CJ19-95

Conventional heating current(A)

32

40

50

80

110

Rated operating current AC-6b 400V A

18

24

29

48

87

Power of controlled cage motor(AC-6b) Kvar

200~240V

6.7

8.5

10

20

40

400~440V

12.5

16.7

20

33.3

60

Rated control capacity

15

Electrical life 104

12

10

Mechanical life 104

300

Operating frequency H-1

300

120

Standard

IEC60947-1, IEC60947-5

Rated insulation voltage V

690

Rated heating current A

10

Auxiliary contact

AC-15

12

DC-13

Minimum load of making

6V 10mA

Power

7~9

Features

●Contactor is the protective type,action mechanism with straight acting, and double-break contact

●Contactor by a CJ19 series ac contactor, a switch contact combination of six line components such as resistor, upper and lower two layers of main contact closure in place.

●In the contactor coil terminal can mount with time-relay auxiliary blocks

●The insulation parts of contactor are made of flame-resistant nylon material,and the iron core with the surface.

Applicable Working

Ambient temperature


-50~+40℃, the average value cannot exceed to +30℃ within 24h

Altitude


≤2,000m

Relative humidity


≤95%

Pollution level


II.

Installation location


Mount on the place where has no obvious vibration or impact

Introduction:

19 switch-over capacitor contactor is new type of components for electric appliances, which is developed and produced on the basis of the introduced foreign technology of the same kind.

The device is widely applied to the low voltage reactive power compensation screen to replace the subassembly composed of three Xd1 current-limiting reactors and a CJ10 contactor, and it is also can be used in the general control circuit to limit flashy flow.

1.CJ19 contactor has install current-limited resistor, can restrain the switch on inrush current.

2.CJ19 contactor is direct-acting and double-break structure, operation flexible, conveniently manual operation inspect.

3.CJ19 connection terminal has insulating boot, very safe.

4.CJ19 can be installed by screw, also can installed in the bus bar.

Packaging & Delivery

Packaging Details:40 pcs per carton or as per your request

Delivery Detail:7-15 working days after get your deposit(Depend on your order)

As one of the trustworthy change over capacitor switching contactor switched capacitor manufacturers and suppliers in China, Ebasee Electric is dedicated to be a professional cleaner energy and efficient energy developer and supplier. With professional factory supplying you with OEM, SCHNEIDER, ABB and LS change over capacitor switching contactor switched capacitor, you can rest assured to wholesale quality products and check the pricelist with us.

Related Products
Contact Now